ČSN EN ISO 21268-3 (836230)

Kvalita půdy - Postupy vyluhování pro následné chemické a ekotoxikologické zkoušení půd a půdních materiálů - Část 3: Perkolační zkouška s cirkulací kapaliny zdola nahoru

ČSN EN ISO 21268-3 Kvalita půdy - Postupy vyluhování pro následné chemické a ekotoxikologické zkoušení půd a půdních materiálů - Část 3: Perkolační zkouška s cirkulací kapaliny zdola nahoru
titulní stránka
(kliknutím zvětšíte)
Objednat
Cena: 440 Kč
včetně 0 % DPH
ks
skladem
tisk na počkání

Anotace obsahu normy

This document specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic substances from a soil and soil-like materials. The method is a once-through up-flow percolation test under standardized conditions of flow rate. The material is leached under dynamic hydraulic conditions. The document has been developed to measure the release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799[6] and ISO 17616[7]. The test results enable the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between material and leachant.
This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods in accordance with existing standard methods. The results of eluate analysis are presented as a function of the liquid/solid (L/S) ratio. The test is not suitable for substances that are volatile under ambient conditions.
NOTE 1 - Volatile organic substances include the low-molecular-weight substances in mixtures such as mineral oil.
NOTE 2 - It is not always possible to optimize test conditions simultaneously for inorganic and organic substances and optimum test conditions can also vary between different groups of organic substances. Test requirements for organic substances are generally more stringent than those for inorganic substances. The test conditions suitable for measuring the release of organic substances will generally also be applicable to inorganic substances.
NOTE 3 - Within the category of organic substances, a significant difference in behaviour exists between the more polar, relatively water-soluble compounds and apolar, hydrophobic organic substances (HOCs). In the latter case, mechanisms of release (e.g. particle-bound or dissolved organic carbon-bound) can be more crucial as well as sorption losses of soluble HOCs on different materials with which they come in contact (e.g. bottles, filters). The test and the results should be used for leaching of organic substances only with thorough consideration of the specific properties of the substances in question and the associated potential problems.
NOTE 4 - For ecotoxicological testing, eluates representing the release of both inorganic and organic substances are needed. In this document, ecotoxicological testing is also meant to include genotoxicological testing.
NOTE 5 - The test is generally not suitable for soils with hydraulic conductivities below 10-8 m/s (see also Annex B). It can be difficult to maintain the designated flow rate already in the range of saturated hydraulic conductivity between 10-7 m/s and 10-8 m/s.
The application of this test method alone is not sufficient for the determination of the leaching behaviour of a material under specified conditions different to those from the test procedure, since this generally requires the application of several test methods, behavioural modelling and model validation. This document does not address issues related to health and safety. It only determines the leaching properties as outlined in Clause 4.

Označení ČSN EN ISO 21268-3 (836230)
Katalogové číslo 509298
Cena 440 Kč440
Datum schválení 1. 4. 2020
Datum účinnosti 1. 5. 2020
Jazyk angličtina (obsahuje pouze anglický originál)
Počet stran 48 stran formátu A4
EAN kód 8596135092987
Tato norma nahradila ČSN P CEN ISO/TS 21268-3 (836230) z května 2010
Dostupnost skladem (tisk na počkání)

Další příbuzné normy

ČSN EN ISO 21268-1 (836230)
Kvalita půdy - Postupy vyluhování pro následné chemické a ekotoxikologické zkoušení půd a půdních materiálů - Část 1: Vsádková zkouška při poměru kapalné a pevné fáze 2 I/kg

ČSN EN ISO 21268-2 (836230)
Kvalita půdy - Postupy vyluhování pro následné chemické a ekotoxikologické zkoušení půd a půdních materiálů - Část 2: Vsádková zkouška při poměru kapalné a pevné fáze 10 I/kg

ČSN EN ISO 21268-4 (836230)
Kvalita půdy - Postupy vyluhování pro následné chemické a ekotoxikologické zkoušení půd a půdních materiálů - Část 4: Vliv hodnoty pH na vyluhování s počátečním přídavkem kyseliny/zásady

foo