ČSN EN 14405 (838006)

Charakterizace odpadů - Zkoušky vyluhovatelnosti - Perkolační zkouška s průtokem zdola nahoru (za specifikovaných podmínek)

ČSN EN 14405 Charakterizace odpadů - Zkoušky vyluhovatelnosti - Perkolační zkouška s průtokem zdola nahoru (za specifikovaných podmínek)
titulní stránka
(kliknutím zvětšíte)
Objednat
Cena: 440 Kč
včetně 0 % DPH
ks
skladem
tisk na počkání

Anotace obsahu normy

This European Standard is applicable for determining the leaching behaviour of inorganic and non-volatile organic substances from granular waste (without or with size reduction (see 7.2)). The waste body is subjected to percolation with water as a function of liquid to solid ratio under specified percolation conditions. The waste is leached under hydraulically dynamic conditions. The method is a once-through column leaching test and the test results establish the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between waste and leachant. This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods according to existing standard methods.
NOTE 1: The mentioned specified percolation conditions are arbitrary and are not necessarily simulating a specific scenario.
NOTE 2: Waste materials that show a saturated hydraulic conductivity between 10-7 m/s and 10-8 m/s can be subjected to this test, but it can be difficult to maintain the imposed flow rate. If a waste shows a saturated hydraulic conductivity below 10-8 m/s, the test will preferably not be carried out (See C.5 for a definition of 'hydraulic conductivity').
NOTE 3: This procedure is generally not applicable to biologically degrading materials and materials reacting with the leachant, leading, for example, to excessive gas emission or excessive heat release.
NOTE 4: This procedure is applicable to materials showing solidification in the column, if the final hydraulic conductivity is within the specified range (see NOTE 2).
NOTE 5: It is not always possible to optimise test conditions simultaneously for inorganic and non-volatile organic substances and optimum test conditions may also vary between different groups of non-volatile organic substances. Test requirements for non-volatile organic substances are generally more stringent than those for inorganic constituents. The test conditions suitable for measuring the release of non-volatile organic substances will generally also be applicable to inorganic substances.
NOTE 6: For ecotoxicological testing, eluates representing the release of both inorganic and non-volatile organic substances are needed. In this standard ecotoxicological testing is meant to include also genotoxicological testing.
NOTE 7: Validation data for non-volatile organic substances are not currently available, but will be added on revision when available.

Označení ČSN EN 14405 (838006)
Katalogové číslo 502938
Cena 440 Kč440
Datum schválení 1. 11. 2017
Datum účinnosti 1. 12. 2017
Jazyk angličtina (obsahuje pouze anglický originál)
Počet stran 44 stran formátu A4
EAN kód 8596135029389
Tato norma nahradila ČSN P CEN/TS 14405 (838006) z června 2011
Dostupnost skladem (tisk na počkání)
foo